The ethyl acetate extraction of Pileostegia tomentella (ZLTE) exerts anti-cancer effects on H1299 cells via ROS-induced canonical apoptosis / 中国天然药物

Lung cancer is the leading cause of cancer death and the most common malignant tumor, the long-term survival of which has stagnated in the past several decades. Pileostegia tomentella Hand. Mazz is a traditional Chinese medicine called "Zhongliuteng" (ZLT) in the pharmacopeia, which has been proved to possess a potent anti-tumor effect on various cancers. In this study, the effects of ZLT N-butanol extraction (ZLTN) and ZLT ethyl acetate extraction (ZLTE) on the viability of non-small cell lung cancer cell (NSCLC) lines H1299 and A549 were evaluated. Here, we firstly reported that ZLTE significantly inhibited H1299 cells growth without affecting the release of lactate dehydrogenase (LDH). In addition, ZLTE induced caspase-dependent apoptosis in a concentration-dependent manner and increased the expression cleaved-PARP and decreased pro-caspase-3, pro-caspase-7, pro-caspase-8, and pro-caspase-9. Moreover, ZLTE increased the level of cellular reactive oxygen species (ROS) in H1299 cells to lead to apoptosis, which was reversed by N-acetyl-cysteine (NAC). Taken together, our results revealed that ZLTE induced caspase-dependent apoptosis via ROS generation, suggesting that ZLTE is a promising herbal medicine for the treatment of NSCLC.

Role of the system of orexin/receptors in neurological diseases / 生理学报

The neuropeptide orexin is widely distributed in the nervous system. Previous studies showed that orexin is involved in the feeding behavior regulation by binding to its receptor 1 (OX1R) and receptor 2 (OX2R) to activate the downstream signaling pathway. Recent studies have demonstrated that the system of orexin and its receptors are also involved in important physiological processes such as sleep-wake, learning and memory, and pathological processes of various neurological diseases. In this review, we summarized the research progress on the function of the orexin and its receptor system in physiological and pathological processes, and revealed the correlation between orexin and nervous system diseases, in order to provide the theoretical guidance for the diagnosis and treatment of the related diseases in the future.

Data fusion and multi-components quantitative analysis for identification and quality evaluation of Gentiana rigescens from different geographical origins / 中国中药杂志

The accumulation of secondary metabolites of traditional Chinese medicine (TCM) is closely related to its origins. The identification of origins and multi-components quantitative evaluation are of great significance to ensure the quality of medicinal materials. In this study, the identification of Gentiana rigescens from different geographical origins was conducted by data fusion of Fourier transform infrared (FTIR) spectroscopy and high performance liquid chromatography (HPLC) in combination of partial least squares discriminant analysis; meanwhile quantitative analysis of index components was conducted to provide an accurate and comprehensive identification and quality evaluation strategy for selecting the best production areas of G. rigescens. In this study, the FTIR and HPLC information of 169 G. rigescens samples from Yunnan, Sichuan, Guangxi and Guizhou Provinces were collected. The raw infrared spectra were pre-treated by multiplicative scatter correction, standard normal variate (SNV) and Savitzky-Golay (SG) derivative. Then the performances of FTIR, HPLC, and low-level data fusion and mid-level data fusion for identification were compared, and the contents of gentiopicroside, swertiamarin, loganic acid and sweroside were determined by HPLC. The results showed that the FTIR spectra of G. rigescens from different geographical origins were different, and the best pre-treatment method was SNV+SG-derivative (second derivative, 15 as the window parameter, and 2 as the polynomial order). The results showed that the accuracy rate of low- and mid-level data fusion (96.43%) in prediction set was higher than that of FTIR and HPLC (94.64%) in prediction set. In addition, the accuracy of low-level data fusion (100%) in the training set was higher than that of mid-level data fusion (99.12%) in training set. The contents of the iridoid glycosides in Yunnan were the highest among different provinces. The average content of gentiopicroside, as a bioactive marker in Chinese pharmacopoeia, was 47.40 mg·g⁻¹, and the maximum was 79.83 mg·g⁻¹. The contents of loganic acid, sweroside and gentiopicroside in Yunnan were significantly different from other provinces (<0.05). In comparison of total content of iridoid glycosides in G. rigescens with different geographical origins in Yunnan, it was found that the amount of iridoid glycosides was higher in Eryuan Dali (68.59 mg·g⁻¹) and Yulong Lijiang (66.68 mg·g⁻¹), significantly higher than that in Wuding Chuxiong (52.99 mg·g⁻¹), Chengjiang Yuxi (52.29 mg·g⁻¹) and Xundian Kunming (46.71 mg·g⁻¹) (<0.05), so these two places can be used as a reference region for screening cultivation and excellent germplasm resources of G. rigescens. A comprehensive and accurate method was established by data fusion of HPLC-FTIR and quantitative analysis of HPLC for identification and quality evaluation of G. rigescens, which could provide a support for the development and utilization of G. rigescens.

Establishment and characterization of lung adenocarcinoma cell line XLA-07 / 中华病理学杂志

<p><b>OBJECTIVE</b>To establish and characterize a lung adenocarcinoma cell line from a female patient in Xuanwei, Yunnan province.</p><p><b>METHODS</b>Surgical specimen of the lung adenocarcinoma was obtained and cultured immediately in RPMI 1640 medium with 10% fetal bovine serum and 10(5) U/L penicillin and 100 mg/L streptomycin. When stable proliferation of the cells was achieved after over 40 passages in culture, the biological features of the cell line were investigated by cell morphology, karyotyping, protein marker expression [cytokeratins (CKs), epithelial membrane antigen (EMA) and CD proteins], growth kinetics, cell cycle phase distribution, mitotic index, colony formation in soft agar, cell invasion and tumorigenicity in Balb/c nude mice.</p><p><b>RESULTS</b>The established cell line was stably cultured for over 80 passages during a one-year period as an anchorage-dependent monolayer of short spindle, polygonal to epithelioid cells under phase contrast microscope. Microglandular cavities and disordered microfilaments were observed under transmission electron microscope. The growth curve presented in an "S" shape with the cell population doubled every 46.7 hours. The mitotic index was 1.5% and the colony formation rate was 8.3%. The cell cycle distribution included 76.9% in G(0)/G(1), 15.1% in S and 8.0% in G(2)/M. The cell line displayed a hypotriploid karyotype with a mode of 66 chromosomes and a median of 64 chromosomes. The cells expressed CK7, CK8, CK (Pan) and EMA by immunohistochemistry. A high level of cell surface expression of CD13 and CD59 was evident by flow cytometry. The cells were able to penetrate Matrigel in vitro but failed to form a stable xenograft in nude mice.</p><p><b>CONCLUSION</b>A new human lung adenocarcinoma cell line, designated as XLA-07, is successfully established from a Xuanwei lung cancer patient.</p>

A comparative study of mechanical experiment and three-dimensional finite element analysis on fracture mode of all-ceramic molar crowns / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To investigate the influence of indenter diameter on fracture strength and fracture mode of IPS e. max all-ceramic crowns using mechanical experiments and three-dimensional finite element (3-DFE) method, to validate the 3-DFE model using mechanical experiments, and to provide a guideline for occlusal surface design for IPS e. max all-ceramic crowns.</p><p><b>METHODS</b>A 3-DFE model of an all-ceramic crown on a molar was established using ANSYS10.0 software. The 3-DFE crown was loaded occlusally at three points to simulate the contact points of a hemispherical indenter loading on the crown. Two indenter diameters (4 mm and 10 mm) were designed by changing loading point, load level and its direction. The stress distribution and the principal stress in the 3-DFE model were calculated. Meanwhile, IPS e. max ceramic crowns were made on a laboratory model and loaded with indenters. The diameters of the indenters were also 4 mm and 10 mm respectively. Fracture mode and fracture-resistance of the crowns were recorded.</p><p><b>RESULTS</b>The principal stress increased as load increases for both small and large indenters. Stress concentrated in the central fossa of the 3-DFE crown when loaded with the small indenter. Stress concentration appeared in the middle area of the occlusal surface mesio-distally when 3-DFE crown was loaded with large indenter. The fracture-resistance load was 600 N to 700 N for 4 mm diameter indenter, and 2500 N to 2750 N for 10 mm diameter indenter. Mechanical experiments indicated the same results as those from 3-DFE analysis.</p><p><b>CONCLUSIONS</b>Both the three-dimensional finite element analysis and the mechanical experiment showed the same results. When loaded with 4 mm diameter indenter, fracture occurred in the central fossa of the crown, however, 10 mm diameter indenter usually caused extensive crown damage.</p>